Care and cleaning.
Day-to-day soil. Remove ordinary dirt and smudges with a mild
soap and water solution. Dry with a soft, lint-free cloth or towel.
For more difficult stains follow the instructions on special cleaning
problems. The use of vinyl “conditioners” or “protectants” is not
required nor are these recommended for use on Boltaflex vinyl
upholstery.
Special cleaning problems.
Although vinyls are resistant to most
common stains, some fabric dyes have the ability to create a
permanent stain. To minimize any problems from these and other
stains, it is recommended that as soon as they are noticed all
stains should be cleaned, making sure the recommended cleaning
agents are used in the following order.
Step 1 cleaners:
Nonabrasive household cleaners to be used with a soft cloth or
damp sponge.
- 409® All-Purpose Spray Cleaner
- Fantastik® Spray Cleaner
- Rinse cleaned area with fresh water and
- dry with a clean cloth.
|
Step 2 cleaners:
Solvent-type cleaner to be liberally applied with a soft cloth or
damp sponge.
- Rubbing alcohol (isopropyl alcohol)
- Rinse cleaned area with fresh water and
- dry with a clean cloth.
Step 3 cleaners:
Strong, active solvent cleaners such as nail
polish remover (acetone/water) to be applied with a soft cloth or
damp sponge. Stain should be removed with less than six (6)
rubs: if stain persists after six rubs, stain has set and probably
cannot be removed. Rinse cleaned area with fresh water and
dry with a clean cloth.
CAUTION:
These solvents are highly flammable. Exercise proper
care in cleaning and notify personnel in area of danger. Wear
rubber gloves during all cleaning activity. Use caution in
cleaning around buttons, stitching and wooden or decorative
trim, since these solvents could seriously damage such areas. |
